english
Русский
Ceramic capacitor AIDE CAPACITOR 1206M3L104J500NT with stable temperature characteristics C0G and X7R
Manufacturer:
AIDE CAPACITOR
Description:
50V 100nF M3L ±5% 1206 Ceramic Capacitors RoHS
Category:
Passives
Specifications
Voltage Rating:
50V
Capacitance:
100nF
Temperature Coefficient:
M3L
Tolerance:
±5%
Mfr. Part #:
1206M3L104J500NT
Package:
1206
Model Number:
Ceramic Capacitor AIDE CAPACITOR 1206M3L104J500NT With Stable Temperature Characteristics C0G And X7R
Introduction
Product Overview
High-voltage multilayer ceramic capacitors (MLCCs) designed for coupling, filtering, and resonant applications in high-voltage electronic circuits. Suitable for use in switching power supplies, AC-DC and DC-DC converters, network/communication interfaces, LCD module backlight power supplies, and energy-saving lamp ballasts.
Product Attributes
- Temperature Characteristics: C0G (030 PPM/), X7R (15%)
- Termination Material: Copper-Nickel-Tin (inner to outer)
- Packaging: Tape & Reel (T), Bulk (P)
- Environmental Compliance: RoHS Directive, REACH Regulation
Technical Specifications
| Item | Specification | Test Method |
| Operating Temperature Range | -55~+85 | |
| Appearance & Dimensions | No visible damage. Dimensions meet specifications. | Visual inspection for appearance. Caliper measurement for dimensions. |
| Capacitance | Within specified tolerance | Test Frequency: 10uF: 1KHz10%; >10uF: 120Hz24. Test Voltage: 10uF: 1.00.2Vrms; >10uF: 0.50.1Vrms |
| Dissipation Factor (DF Value) | <0.1% | Cr10uF: 1KHz10%, 1V0.1rms. Cr10uF: 120Hz24, 0.5V0.1rms. |
| Insulation Resistance | >1 G | Test Voltage: 250V. Test Time: 605 sec. Test Humidity: 70%. Test Temperature: 255. |
| Dielectric Withstanding Voltage (DC) | No dielectric breakdown or damage | Test Voltage: Rated Voltage. Test Time: 2 sec. |
| Solderability | Tinning rate >95%, pinholes or rough areas <5%, no visible damage. | Preheat: 80-120 for 10-30 sec. Lead-free solder, flux. Solder Temp: 2455. Immersion Time: 21 sec. |
| Solder Heat Resistance | No visible damage, tinning rate 95% | Preheat: 120~150/60 sec. Solder Pot Temp: 2705. Immersion Time: 101 sec. Both end electrodes fully immersed. Clean with solvent after removal. Room temp. Storage: 242 hrs. Capacitance Change Rate: -2.5% < C/C 2.5%. DF: Same as NO4. IR: Same as NO5. |
| Bending Strength | No visible damage | Test Substrate: Al2O3 or PCB. PCB Size: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Bending Depth: 1mm. Pressing Speed: 1mm/sec. Measurements taken under bent state. Capacitance Change Rate: C/C5%. |
| Terminal Bond Strength | No visible damage | |
| Temperature Cycling | C/C2.5% | Pre-conditioning: High temp 1 hr, store 241 hrs, initial measurement. 5 temp cycles. Store at room temp/humidity for 242 hrs before testing. Steps: -55+0/-3 (30 min), 25 (2-3 min), +85+3/-0 (30 min), 25 (2-3 min). |
| Damp Heat Resistance | No visible damage | After test, store at room temp/humidity for 24 hrs before testing. Temperature: 402. Humidity: 90~95%RH. Time: 50024 hrs. Capacitance Change Rate: C/C5%. DF: 2 times initial standard. IR: >500M. |
| High Temperature Load Test | No visible damage | After test, store at room temp/humidity for 242 hrs before testing. Temperature: 85. Time: 100048 hrs. Voltage: 100VV250V (1.5 times rated voltage). Capacitance Change Rate: C/C5%. DF: 2 times initial standard. IR: >500M. |
2507091655_AIDE-CAPACITOR-1206M3L104J500NT_C49326733.pdf
Related Products
High Voltage Multilayer Ceramic Capacitor AIDE CAPACITOR 1206C0G102J102NT for Power Supply Filtering
1kV 1nF C0G ±5% 1206 Ceramic Capacitors RoHS
performance in coupling and wave filtering with AIDE CAPACITOR 1206C0G681J102NT multilayer ceramic capacitors
1kV 680pF C0G ±5% 1206 Ceramic Capacitors RoHS
Ceramic capacitor AIDE CAPACITOR 1206C0G102J102NT designed for coupling and resonant circuit applications
1kV 1nF C0G ±5% 1206 Ceramic Capacitors RoHS
ceramic capacitor AIDE CAPACITOR 1206C0G681J102NT designed for communication power supplies and lighting
1kV 680pF C0G ±5% 1206 Ceramic Capacitors RoHS
Ceramic capacitor AIDE CAPACITOR 1206M3L104J500NT designed for AC DC DC DC converter and power circuits
50V 100nF M3L ±5% 1206 Ceramic Capacitors RoHS
Multi Layer Ceramic Capacitor AIDE CAPACITOR 0603X7R823K500NT for Coupling and Wave Filtering in High Voltage Circuits
50V 82nF X7R ±10% 0603 Ceramic Capacitors RoHS
Multi Layer Ceramic Capacitor AIDE CAPACITOR 0805C0G102J101NT for Wave Filtering and Resonant Circuit
100V 1nF C0G ±5% 0805 Ceramic Capacitors RoHS
high voltage capacitor AIDE CAPACITOR 0805X7R201K500NT designed for AC DC DC DC power chargers and switch power supplies
50V 200pF X7R ±10% 0805 Ceramic Capacitors RoHS
multi layer ceramic capacitor AIDE CAPACITOR 0805X7R223K101JT for resonant and coupling applications
100V 22nF X7R ±10% 0805 Ceramic Capacitors RoHS
Ceramic Capacitor 0805 Package AIDE CAPACITOR 0805X7R273K500NT X7R Dielectric Multilayer Component
50V 27nF X7R ±10% 0805 Ceramic Capacitors RoHS
Send RFQ
Stock:
MOQ: